MIL-PRF-32504
ASTM D6413
-
Standard Test Method for Flame Resistance of Textiles
(Vertical Test)
ASTM D7478/D7478M -
Standard Specification for Heavy Duty Sheathed Wood
Crates
ASTM E84
-
Standard Test Method for Surface Burning
Characteristics of Building Materials
Standard Practice for Determining Resistance of
ASTM G21
-
Synthetic Polymeric Materials to Fungi
ASTM G155
-
Standard Practice for Operating Xenon Arc Light
Apparatus for Exposure of Non-Metallic Materials
(Copies of these documents are available online at www.astm.org)
American Association of Textile Chemists and Colorists (AATCC) 169
(Copies of this document are available online at www.aatcc.org)
International Protection Codes (IP) International Electrotechnical Commission
(Copies of this document are available online at www.iec.ch)
National Electric Code (NEC) Article 210, Branch Circuits
(Copies of this document are available online at www.nfpa.org)
National Fire Protection Association (NFPA) 701
(Copies of this document are available online at www.nfpa.org)
Unified Facilities Criteria (UFC) 3-600-01 Section 2-5 "Means of Egress"
(Copies of this document are available online at www.wbdg.org)
2.4
ORDER OF PRECEDENCE PUBLICATIONS: Unless otherwise noted herein or in the
contract, in the event of a conflict between the text of this document and the references cited herein, the
text of this document takes precedence. Nothing in this document supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Operating requirements: The Modular Large Area Maintenance Shelter Aviation (Type A), the
Modular Large Area Maintenance Shelter Vehicle (Type V) and the Modular Large Area Maintenance
Shelter Storage (Type S) shall be portable, temporary facilities of modular construction to support Army
rotary and fixed wing (Type A), vehicle maintenance (Type V) and general storage (Type S) in forward
operational areas without fixed facilities. The structure shall be a pre-engineered unit requiring no on-
site fabrication or welding to install, strike, or relocate. This applies to structural frame components,
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business