MIL-PRF-32504
3.2.5 Temperature: The MLAMS shall be capable of operating in the temperature range -20oF to
+120oF, and in conditions comparable to MIL-STD 810G Part Three Table 1, "Hot Dry A1" through
"Basic Cold C1" without structural damage, degradation or permanent deformation.
3.2.6 Humidity: The MLAMS shall be capable of withstanding daily exposure of up to 97% relative
humidity and exposure of 100% relative humidity (with condensation) for short periods of time, without
evidence of structural damage, degradation or permanent deformation of structural components, end door
fittings, personnel access doors, electrical devices, supply panels, power transmission cabling, outer shell
fabric or interior insulating fabric if supplied.
3.2.7 Sunlight (Ultraviolet Effects): The MLAMS weather barrier fabric, the insulation liner fabric and
associated fabric panel construction materials shall be selected so as to resist damage under normal
sunlight usage and degradation due to UV light for a period of seven years continuous duty under normal
conditions. The shelter materials shall show no evidence of structural damage, degradation or permanent
deformation. After performance of accelerated weathering or UV effects, the weather barrier fabric shall
show no signs of performance degradation in Breaking Strength, Coating Adhesion, Tongue Tear, Grab
or Strip Tensile, Flame Resistance or Dead Load Capacity.
3.2.8 Sand and dust: The MLAMS shall protect occupants from dust and sand storms.
3.2.9 Mildew and Fungus: The MLAMS shall resist dry rot, fungus and mildew encountered in all
climates.
3.2.10 Environmental acids: The MLAMS shall resist damage from acids, including acid rain and bird
droppings.
3.2.11 Varying terrain: The MLAMS shall be designed such that it can be installed over grade which
may vary 1.5% in length and width.
3.2.12 Petroleum, oils and lubricants: The shelter fabric, electric cables and other components shall be
resistant to petroleum, oils and lubricants.
3.2.13 Transportation environment: When placed in ISO shipping containers the basic MLAMS
components shall be compatible with typical shock, bounce and vibration environment encountered
during shipping by ground vehicle, train, aircraft and material handling equipment.
3.3 INTERFACE REQUIREMENTS:
3.3.1 Interoperability and interchangeability: The shelter frames for MLAMS-S and MLAMS-A/V
shall be capable of converting from one type to another through the addition or subtraction of
components.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business